Specification of TRUBACH FLEX series
TRUBACH FLEX series is a heavy yet flexible reinforced fluid transfer hose for your irrigation system. This premium lay-flat hose is made from a blend of nitrile rubber and PVC, with added UV barrier to prevent damage from UV radiation. Excellent bonding between cover and lining as well as firmly encapsulating the reinforcing polyester.
Materials
• Made from a blend of nitrile rubber and PVC, with added UV barrier to prevent damage from UV radiation
Key Features
• Used as feeder hose for any type of water transfer application.
• General purpose, water discharge rubber hose.
• Adapts well to the terrain and can be routed around obstacles.
• The hose is also used as a light weight wash down or transfer hose for water based and non polar liquids in construction and general industry.
• Operating temperature from -50°C to + 75 °C (-58°F to +167°F) for pure water.
Advantages
• Resistance to a wide range of chemicals.
• Excellent UV, ozone and weathering resistance.
• Excellent adhesion between cover/lining and the weave.
• Some diameters can be produced in lengths above 200 meters.
TRUBACH FLEX Extra is a more reinforced fluid transfer hose for agricultural systems, but may also serve as a drag hose in smaller umbilical systems. Here is the specific dimensions and parameters for TRUBACH FLEX Extra:
INNER DIAMETER | WALL THICKNESS | WEIGHT | BURST PRESSURE | TENSILE STRENGTH | |||||
Inch | mm | Inch | mm | Lbs / Ft | Kg / m | Psl | Bar | x 1000 Lbs | Tons |
3 | 76 + 2.0 | 0.12 | 3.1 | 0.64 | 0.95 | 720 | 50 | 20.1 | 9.1 |
3 1/2 | 90 + 2.5 | 0.13 | 3.3 | 0.79 | 1.18 | 640 | 44 | 22.3 | 10.1 |
4 | 102 + 2.5 | 0.13 | 3.2 | 0.80 | 1.20 | 610 | 42 | 25.1 | 11.4 |
4 1/2 | 114 + 3.0 | 0.13 | 3.2 | 0.96 | 1.43 | 510 | 35 | 27.6 | 12.5 |
5 | 127 + 4.0 | 0.13 | 3.4 | 1.13 | 1.68 | 440 | 30 | 30.2 | 13.7 |
6 | 151 + 4.0 | 0.15 | 3.8 | 1.41 | 2.10 | 610 | 42 | 37.5 | 17.0 |
Note: Safety BP/WP is 2:1 (50%). For all non-hazard and/or non-flammable liquids.